Introduction to PET/CT Imaging
Last Modified: June 7, 2016
What is a PET scan?
- PET stands for Positron Emission Tomography. It is an imaging exam that looks at the metabolic activity of a radioactive compound inside your body.
- The most common radioactive compound used for PET imaging is called FDG (18-Fluro-deoxy-Glucose), which is very similar to glucose, and its metabolism in the body can be seen on PET images.
- Since cancer cells are metabolically more active, they use more glucose (and FDG) and “light up” on the scan as abnormal activity.
- Unlike MRI and CT, which provide pictures of the physical structures of the body, a PET scan provides metabolic imaging that show how the body’s organs metabolize the FDG. The PET is able to show whether tissue is normal or abnormal, based on its cellular metabolism.
What is a PET/CT scan?
- PET/CT is a highly advanced imaging technique, which combines PET (positron emission tomography) and CT (computed tomography) in one machine.
- The scanner merges PET and CT images together to provide a combination of both functional and structural information.
- It helps to diagnose cancer and provide additional information that can help determine which therapies are appropriate for the patient. It also helps monitor a patient’s response to treatment or identify metastasis.
How does PET work?
- A PET scan may also be referred to as an “FDG-PET scan.” FDG is a radioactive analog of glucose (sugar). For a PET scan, a small amount of radioactivity is attached to sugar (glucose) molecules and given to the patient through an IV.
- Upon entering the body, the FDG is processed by organs and tissues as part of their normal function and is detected by the PET scanner. A computer then creates a picture of where the FDG is taken up (called “activity”) using colors to highlight the different levels of activity.
- PET has the ability to demonstrate abnormal metabolic activity in organs, sometimes even before there is an abnormality that could be seen on CT or MRI.
- Depending upon the reason for the test being done, the radiotracer can be injected into a vein, inhaled by breathing it in or swallowed.
How can the PET detect cancer cells?
- Tumor cells have a high rate of metabolism and because of this, they take up more of the radioactive glucose (FDG).
- This makes the cancer cells appear more “active” than other areas on the scan pictures. The rate of uptake of FDG by the tumor cells is proportional to their metabolic activity.
- In addition to the color picture, the amount of uptake on PET is often given a number called “SUV” (standard uptake value); most active cancers will have an SUV greater than 2.5.
- Cancer cells are not always the only “PET avid cells” (or cells that take up the FDG) in the body. It is important to remember that a PET scan is not able to distinguish metabolic activity due to tumor from activity due to non cancerous processes, such as inflammation or infection.
- Therefore, it is important to discuss the results of your scan with your healthcare provider.
PET/CT and Cancer
- PET/CT imaging with FDG has become an important part of cancer care. A PET scan allows the radiologist to distinguish between a benign and cancerous tumor- the cancerous one will appear more active.
- In some cases, after treatment for cancer, there may be dead cancer cells left behind, which would still be seen on MRI or CT scan, but the PET can show that they are not active.
- PET can be used to determine how a tumor is responding to treatment or to detect metastases. Chemotherapy causes changes in cellular activity and these changes can be detected with a PET scan well before they would be seen on CT or MRI alone.
How to prepare for your PET Scan
- Confirm your appointment 24 hours prior to the test. Because of the high demand for a PET/CT scan, and the short half-life of the tracer, your slot may be given to another patient.
- Bring a list of the medications that you are taking, brief medical history, and treatments that you have had (chemotherapy, radiation therapy, or surgery). If you take any medications for diabetes, you may be instructed not to take these, as they could interfere with the FDG.
- Patients must fast overnight prior to a PET scan. Afternoon patients may eat a light meal six hours prior to exam. They can and should drink plenty of water while they are fasting.
- You should avoid vigorous physical exercise the day before, on the day of the scan, and until the scan is completed.
- If you had other imaging studies performed such as CT scans, MRI, ultrasound etc, it is crucial that the films and reports are made available to the radiologist who is interpreting the PET/CT scan.
The PET Imaging Procedure
- The test will take 2-3 hours, from start to finish.
- After you register, you will be taken to the PET prep room. An IV will be put in and you will be given the radioisotope (FDG).
- There is a period of approximately 60-90 minutes wait time during which the FDG circulates through the body.
- When it is time for the PET scan to begin, you will lie on a table that slides into the scanner, a donut-shaped machine that resembles a CT scanner. The table will slide through the PET scanner.
- For most patients, the scan takes about 30-60 minutes, depending on whether the whole body, or a particular part of the body is scanned. You will need to lie still during that period.
- For most cancers, the body is scanned from just below the brain to the mid-thigh. In certain cancers such as melanoma, a full body scan, from the top to the head to the toes, is used.
- You may go home when the study is finished and resume your regular diet and medication. You are encouraged to drink water to help clear the radioactivity from your body.
- If you have received sedation during the course of the exam, you will need someone to drive you home.
Will my health insurance cover PET?
- Most insurance companies reimburse for PET procedures, including Medicare. Contact your insurer directly to learn about payment reimbursement.
- The staff at your doctor’s office or the imaging center can also provide more information and help with preauthorization for insurance reimbursement.
How much radiation does a PET scan expose the patient to?
- Because the radioisotope used in a PET scan is short-lived, the amount of radiation exposure the patient receives is small and is the same as from a CT scan of the chest.
- While this dose is very low, women who are pregnant or breastfeeding should discuss the risks of radiation exposure with their doctors.
Do people experience any reactions as a result of FDG injection or the PET scan?
- Patients typically do not experience any reactions as a result of the PET scan, because the body processes the radioactive compound naturally. Therefore, no side effects are expected.
What are the other clinical applications of PET Imaging?
- Traditionally, PET has been used in oncology, but the use of PET is not limited to oncology. PET has also been used in the fields of neurology and cardiology. For example, PET can measure blood flow and glucose metabolism in the muscles of the heart. Areas of low blood flow, but normal metabolism in the heart muscle indicate heart muscle that may be repaired by restoring blood flow, while areas of matched low blood flow and metabolism may already be irreversibly damaged and require other treatments. In addition, blood flow in the heart may be measured at rest and after exercise to detect partly obstructed arteries in the heart responsible for angina.
- In the field of neurology, PET has been used to study seizure disorders and Alzheimer’s disease. PET imaging can localize the source of seizure focus in patients with medically uncontrolled seizures, for potential surgical management.
Click on any of these terms for more related articles